BattleBorn Batteries LiFePO4 Settings on Epever MPPT Charge Controller

BattleBorn LiFePO4 Battery

I took the $1000 plunge and got a BattleBorn 100 amp hour battery.  I know it sounds crazy but there is literally NO COMPARISON between this battery and a Flooded Lead Acid battery (my first solar battery) or an AGM Deep Cycle Battery (my second solar battery).

The BattleBorn Battery wins in EVERY single metric except maybe for cost.

It charges like lightning, stays charged, and uses power way more efficiently and lasts longer than the other two batteries I mentioned above.

 

If you have a solar storage system of any kind you will benefit from this battery.  I guarantee it.  The biggest advantage is in depth of discharge (DOD).  That means you can use the battery near death and it won’t damage it.   Take a lead acid battery and use it below 50% of charge and you’ll damage it.

My charge controller is an Epever 20 amp Tracer BN 2215 MPPT.  It does NOT have a Lithium Iron Phosphate setting but it does have a configurable USER mode.   If you set the parameters manually you’ll have a perfect setup for maintaining your $1000 battery.

Here are the settings:

  • Battery Type = USER
  • Temp Compensation Coefficient = 0
  • Charge Limit = 14.6
  • Float Charge = 13.6
  • Equalize Time = 0

That’s it.  These settings were provided by BattleBorn Batteries specific to the Epever MPPT Tracer Charge Controllers.

BattleBorn LiFePO4 Battery in my system

Also Battleborn provided me a Depth of Discharge charge which I thought was pretty cool.

BattleBorn Batteries Depth of Discharge Chart for LiFePO4 battery (100 ah)

Leave a Reply

Your email address will not be published. Required fields are marked *